Support Ticket Information Request Check Network Status Knowledge Base     Helpful Links Register Online  Internet Speed Test Add to MS Outlook R-Conn Full Client R-Conn Quick Connect R-Conn Silent Package Lead Payment Portal Virtual Support

Enter or Lookup Search Criteria in 1 or more fields and click the search button to find the How To Article. Search How To Articles  How To Lookup Select Value How to set shipping costs in Scorpion Connect a USB Camera to Thin Client View emails of deleted employees with GFI Email Archiver The information in this article applies to: GFI MailArchiver for Exchange 4 GFI MailArchiver for Exchange 5 GFI MailArchiver for Exchange 6 How to silence a Raid Alarm with Intel SRC16 Raid Controller .motorola.com loghost # vi /etc/defaultdomain motorola.com Define domain name for the runtime environment: # domainname motorola.com The server should now be ready for AXSVision operation.">1. Connect to the Console Port of the Solaris server, and to the COM1 port of the PC 2. Open a terminal window on the PC and log into the server as the root user. 3. If AXSVision applications are running, stop the applications first before running sys-unconfig Stop AXSVision Server: # /etc/rc3.d/s99axvision_server stop Stop LDAP: # /etc/rc2.d/s99DSSStartup stop Stop Oracle: # /etc/rc2.d/s99dbora stop 4. Run "sys-unconfig" to erase the system identity information. This command will erase the system name, IP address, defautl router, domain name, root password, and all locale information from the system, an then halts the system. The next time the system is booted, it will prompt the user to re-enter all of the identity information. To Erase the system identity information, type the following command: # sys-unconfig Warning: This program will unconfigure your system. It will cause it to revert to a "blank" system - it will not have a name or know about other systems or networks. This program will halt the system. Do you want to continue (y/n) ? Y (NOTE: The server will now shut down….) Once the server is down, it can be powered off and re-located. 5. When the server is ready to power back up, re-connect to the Console Port of the Solaris server, and to the COM1 port of the PC. Powering up the server will start a server POST test (diagnostics). (5 minutes maximum) After the POST test completes, the system will begin booting the OS and promt the user to set the system parameters. When the server reboots, it should now have the new name and IP address. 6. Configure the domain name for the server. # vi /etc/hosts x.x.x.x <hostname> <hostname>.motorola.com loghost # vi /etc/defaultdomain motorola.com Define domain name for the runtime environment: # domainname motorola.com The server should now be ready for AXSVision operation. How to change an ASYNC C Card to an ASYNC D Card DESCRIPTION: This document outlines the process of converting an OLT from ASYSC System Controllers to ASYSD System Controllers. Note: This procedure assumes that the OLT has ASYSC System Controllers in both slots SYS-A and SYS-B and that the System Controller in SYS-A is the Active System Controller. Note: This procedure is designed for OLT R7.3.0.1 software. Note: Please follow proper ESD protection when working with the OLT hardware. How to Retrieve an ONT Inventory list from the AXSVision Interface Server RETRIEVE AN ONT OR MODULE INVENTORY REPORT IN AXSVISION How To Search Summary Vendor Select Value Any Datatech GFI Intel MOTOROLA References Keys Select Value Allstate Async AXSVision, Motorola, Inventory, Report Change server name, change IP address, renmae server Email Archiver GFI Intel, SRC16, Raid Inventory Scorpion, Datatech Article ID Records per page Select Value 5 10 25 100 Clear

Copyright   Lietz Development, Inc. 1996. All Rights Reserved.